Maine, New Hampshire, and Vermont
Tub-to-shower conversion in New Hampshire, Vermont, and Maine.
A walk-in conversion made from the tub you already own. When the tub wall is too high to manage, we open the front and finish it as a low walk-through. The plumbing stays. The bathroom stays. Most installations are complete the same day.
The exclusive TubcuT installer for Maine, New Hampshire, and Vermont. Based in Bedford.
Finished in a day
Most installations take about half a day. The shower is ready that evening.
No demolition
The tub and the plumbing stay. We do not rebuild the bathroom.
Fully reversible
The cutout is saved. The original tub can be restored.
Lifetime warranty
The manufacturer warrants The TubcuT for life.
How it works
Photographs first. The tub stays.
- 1
Begin with photographs
Email a few pictures of the tub, and the town. A family member is welcome to send them. We will tell you whether TubcuT is the right fit.
- 2
Installed in one day
We open the front of the tub and finish the edge so it holds water. This is not a plastic cover set on top.
- 3
A low, easy step
The threshold is about four inches, like an ordinary shower. There is no high wall to step over.
Finished work
Openings we have installed.
The difference
Built into the tub, not set on top of it.
For more than twenty years, The TubcuT has been shaped to the tub itself: watertight, with a low step.
The TubcuT
- Bonded into the existing tub
- Sized to that tub
- A threshold of about four inches
- Restorable, if the cutout is kept
A plastic insert
- A prefabricated piece, caulked in place
- A fixed size that may not suit the tub
- Often a lip at the opening
- Difficult to return the tub to its original form
Where we work
We come to the house.
TubcuT Northeast is the exclusive installer of The TubcuT in Maine, New Hampshire, and Vermont. We work throughout all three states, from the seacoast to the North Country and every town in between. Every installation is scheduled from our Bedford office.
New Hampshire
Bedford, Manchester, Nashua, Concord, Portsmouth, Keene, Laconia, Lebanon, and Conway.
Maine
Portland, Lewiston, Augusta, Bangor, Brunswick, Biddeford, and the rest of the state.
Vermont
Brattleboro, Bennington, Springfield, Bellows Falls, Wilmington, then north through Rutland, Montpelier, and Burlington.
Phone hours are Monday through Friday, 9 a.m. to 5 p.m. If you call after that, leave a message or email the photographs. We return the call the next weekday.
Who we are
A Bedford family company.
We are TubcuT Northeast L.L.C., the exclusive certified installer of The TubcuT for New Hampshire, Vermont, and Maine. We are a sister company of LeClerc & Son Enterprises L.L.C.—a second-generation, family-run construction company here in Bedford—and we take pride in careful workmanship and plain, helpful service.
Parker LeClerc owns TubcuT Northeast (and LeClerc & Son). Christine LeClerc answers the phone and will help you figure out whether TubcuT is a fit for you. A dedicated installer, factory-trained on The TubcuT, does the work in the bathroom—one careful visit, and we treat the house with respect.
Family owned
Sister company of LeClerc & Son Enterprises L.L.C., Bedford, NH—1 Hardy Rd. #174.
Christine answers
Our office manager picks up when you call. She knows The TubcuT and will get you started.
Factory-trained install
A dedicated installer, trained at The TubcuT factory, does the work on site.
Questions worth asking
What is a TubcuT tub-to-shower conversion?
The TubcuT is a section cut from the front of your existing bathtub and finished as a low, watertight walk-through, with a threshold of about four inches. The tub and plumbing stay in place.
Where does TubcuT Northeast install?
TubcuT Northeast is the exclusive TubcuT installer for New Hampshire, Vermont, and Maine. We are based at 1 Hardy Rd. #174, Bedford, NH 03110. Call (603) 488-2699, Monday through Friday, 9 a.m. to 5 p.m.
How long are you at the house?
One visit. Most installations finish in about half a day, and the shower is ready that evening.
Do you remodel the bathroom?
No. We work with the tub and plumbing already in place. The room is not taken down to the studs.
Will my tub qualify?
Most do. Fiberglass, acrylic, steel, and cast iron, including soaking tubs, whirlpools, and tubs set in tile. Photographs tell us whether yours qualifies.
Can it be reversed later?
Yes. If the cutout is saved, the bathtub can be restored to its original form.
Is this a cover that sits on the tub?
No. Those inserts are a fixed piece, sealed with caulk. TubcuT is cut and fitted to your tub, so the opening is the size you need.
Might insurance help?
Some health plans contribute toward a safer bath. Coverage is never assured. We will discuss it when you send photographs, and your plan should confirm.
Send photographs
Call, or send photographs.
Send a few photographs with the form below. A family member can send them. When the tub is a fit, we schedule the day.
(603) 488-2699TubcuT Northeast1 Hardy Rd. #174
Bedford, NH 03110
Monday through Friday, 9 a.m. to 5 p.m.
TubcuT Northeast · Exclusive installer for Maine, New Hampshire, and Vermont
Sister company of LeClerc & Son Enterprises LLC · Bedford, NH
TubcuT® is a trademark of its manufacturer. Photographs show the kind of finished opening we install. Insurance coverage varies by plan.